Products
Multifunctional Service Vessel
  • Multifunctional Service VesselMultifunctional Service Vessel
  • Multifunctional Service VesselMultifunctional Service Vessel
  • Multifunctional Service VesselMultifunctional Service Vessel
  • Multifunctional Service VesselMultifunctional Service Vessel
  • Multifunctional Service VesselMultifunctional Service Vessel
  • Multifunctional Service VesselMultifunctional Service Vessel
  • Multifunctional Service VesselMultifunctional Service Vessel
  • Multifunctional Service VesselMultifunctional Service Vessel
  • Multifunctional Service VesselMultifunctional Service Vessel
  • Multifunctional Service VesselMultifunctional Service Vessel
  • Multifunctional Service VesselMultifunctional Service Vessel
  • Multifunctional Service VesselMultifunctional Service Vessel
  • Multifunctional Service VesselMultifunctional Service Vessel
  • Multifunctional Service VesselMultifunctional Service Vessel

Multifunctional Service Vessel

HAIDING SHIPYARD is a multifunctional service vessel manufacturer offering vessels for inland towing, material supply, maintenance support, and pollution response. The vessel supports 300–5000 HP power, up to 80 t bollard pull, and a design draft of ≤1.2 m, with Z-drive or VSP propulsion options. As an experienced shipbuilding factory, HAIDING provides project-specific configurations and CCS-certified vessels after completion and survey.

    The HAIDING SHIPYARD multifunctional service vessel is intended for inland port and waterway operators that require a single platform to cover multiple tasks. The design integrates towing, material supply, on-water maintenance, and pollution control functions. Power options range from 300 HP to 5000 HP, and the vessel can be configured with shallow-draft propulsion for restricted waterways.

     

    This vessel is built to CCS inland waterway rules. Certification is issued for each individual vessel after completion and survey. The standard hull uses Q345 high-strength steel with additional bottom protection. Deck equipment, lifting capacity, and accommodation are selected according to the operating profile.

    Core Specifications

    Parameter

    Specification

    Design Basis / Notes

    Power range

    300–5000 HP, modular

    Selected based on required bollard pull and operating profile

    Bollard pull

    20–80 t (196–784 kN)

    Calculated at design draft with specified propeller configuration

    Engine options

    Weichai, Cummins, Yanmar

    Freshwater duty rating, low fuel consumption

    Propulsion

    Shallow-draft Z-drive azimuth or VSP thruster

    Dual engine / dual propeller optional; anti-wrap guard included

    Design draft

    ≤1.2 m

    Draft at design load condition; actual operating depth must include under-keel clearance

    Hull material

    Q345 high-strength steel

    CCS approved material

    Bottom protection

    12 mm manganese steel guard plate

    Added in grounding-prone areas

    Coating system

    Three-layer inland water coating

    Suitable for fresh water and mildly polluted water

    Design service life

    ≥12 years

    Under assumed operating hours and maintenance schedule; see design assumptions

    Wind condition

    Designed for Beaufort Force 8

    Operating restrictions apply based on loading and stability

    Control system

    PLC integrated control

    Response time ≤0.5 s under design conditions

    Positioning accuracy

    ±0.5 m

    With DP or reference system, depending on configuration

    Fire fighting

    Class 1 external fire fighting system

    As defined by CCS rules

    Pollution control

    Inland river oil recovery device

    Standard configuration for spill response

    Protection equipment

    Propeller guard, hull anti-collision strips

    Standard

    Life-saving equipment

    Full set: life rafts, life jackets

    Meets inland waterway safety requirements

    Certification

    CCS inland river ship certification

    Per vessel after survey

    Additional technical data, including length, beam, depth, tank capacities, deck load, and accommodation layout, are provided during the design phase based on the intended operating area and tasks.

    Engineering and Construction Notes

    Shallow draft design

    The multifunctional service vessel is designed with a draft of 1.2 m or less at the design load condition. This allows access to many inland waterways, but the minimum operating water depth is determined during design and must include under-keel clearance, riverbed conditions, and local navigation rules. Shallow draft does not guarantee operation in water depths equal to the draft.

    Propulsion selection

    Two propulsion options are offered:

    Shallow-draft Z-drive azimuth thrusters: suitable for high maneuverability, frequent berthing, and shallow water.

     

    VSP thrusters: selected when precise low-speed control and high thrust vectoring are required.

     

    Dual engine and dual propeller arrangements are available for operators that require redundancy or enhanced reliability.

    Hull structure and grounding protection

    The hull is built from Q345 steel. The bottom is reinforced with a 12 mm manganese steel guard plate in areas likely to contact the riverbed or submerged objects. Stiffening is increased in the bow and bottom plating.

    Maintenance access

    Maintenance access is provided for the engine, thruster, hydraulic system, and pollution control equipment. Lifting points and removable deck panels reduce downtime during routine service.

    Representative Configuration Examples

    The following examples show typical configurations delivered or offered by the shipyard. Actual specifications are confirmed during order review.

    Vessel Type

    Power

    Draft

    Bollard Pull

    Application

    Region

    Multi-purpose service vessel

    600 HP

    1.0 m

    12 t

    Port supply and small barge towing

    Yangtze River tributary

    Maintenance support vessel

    1200 HP

    1.1 m

    25 t

    Emergency maintenance, crane operations

    Pearl River Delta

    Pollution response vessel

    800 HP

    1.0 m

    15 t

    Oil spill recovery, patrol

    Beijing-Hangzhou Grand Canal

    High-capacity towing vessel

    3000 HP

    1.2 m

    60 t

    Barge formation towing

    Yangtze River main channel

    Project-specific references and photos can be provided upon request.


    Multifunctional Service VesselMultifunctional Service VesselMultifunctional Service VesselMultifunctional Service Vessel


    Is This Vessel Suitable for Your Operation?

    The following table helps determine the appropriate configuration based on operating conditions.

    Operating Requirement

    Recommended Configuration

    Shallow water access

    Design draft ≤1.2 m, bottom protection

    Barge towing

    Select bollard pull based on barge size and current

    Pollution response

    Oil recovery device, storage tank, deck crane

    Long-duration crew deployment

    Extended accommodation, additional tankage

    Northern China winter operation

    Ice-resistant reinforcement, engine heating

    High redundancy

    Dual engine, dual propeller

    Precise positioning

    PLC control with positioning reference system

    Certification, Warranty, and Service

    Shandong Haiding Shipbuilding has been engaged in vessel design and production since 1993. The company operates quality management procedures covering material traceability, welding inspection, and final trials.

    The multifunctional service vessel is built to CCS rules. A CCS certificate is issued for each vessel after completion and survey. For export projects, other classification society standards can be discussed.

    Core components, including the engine, thruster, and control system, are covered by a 2-year warranty under the terms of the purchase contract. Spare parts are available from the factory and through the company's service network. Service points are located in major inland waterway regions, including the Yangtze River, Pearl River, and Beijing-Hangzhou Grand Canal. Technical support is available under a service agreement.

    Frequently Asked Questions

    What tasks can this vessel perform? 

    Standard configurations support towing, port supply transfer, maintenance support, and oil spill response. Deck equipment and systems can be adjusted based on the intended operating tasks.


    What water depth is required? 

    The vessel is designed with a draft of 1.2 m or less. The minimum operating water depth is calculated during design and depends on load condition, under-keel clearance, and local regulations. It is not equal to the draft alone.


    Which certification does the vessel hold? 

    Each vessel is built to CCS inland waterway rules and receives a CCS certificate after completion survey. Other classification society options can be discussed before contract signing.


    What warranty is provided? 

    Core components are covered by a 2-year warranty. Hull structure and other terms are specified in the purchase contract.


    Can the vessel be customized for a specific river or port? 

    Yes. Power, draft, deck equipment, accommodation, and propulsion type can be adjusted during the design phase. Technical review is required to confirm compliance with local waterway regulations.


    How is the required bollard pull determined? 

    Bollard pull is calculated based on the size and type of barges or vessels to be towed, current speed, wind conditions, and required maneuvering capability. The shipyard provides a calculation during the design phase.


    How is the shallow draft achieved? 

    Shallow draft is achieved through hull form design, weight control, propulsion configuration, and placement of tanks and equipment. This is an integrated design result, not a single feature.


    When is a Z-drive selected over a VSP thruster? 

    Z-drive azimuth thrusters are generally selected for shallow water and high maneuverability. VSP thrusters are considered when precise low-speed control and high thrust vectoring are required. The choice depends on operating profile, maintenance preferences, and total cost.


    What is the delivery time? 

    Delivery time depends on configuration and current production schedule. A preliminary schedule is provided after technical requirements are confirmed.



    How is the vessel transported? 

    The vessel can be delivered by water, by road using modular sections, or by rail, depending on size and destination. The transport method is confirmed during order review and must consider route restrictions.

    Contact and Technical Inquiry

    For technical specifications, drawings, or a customized proposal, contact the engineering team at Shandong Haiding Shipbuilding. Provide the operating area, required tasks, and expected working conditions so that the design can be matched to your operation. Project references and additional evidence are available on request.

     

    Send Inquiry
    Contact Info
    Looking to buy a dredger, tugboat or custom engineering vessel? Send your requirements to HAIDING SHIPYARD for product details, technical consultation and a competitive shipbuilding quotation.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept