Products
Polluted Water Treatment Pumping Station
  • Polluted Water Treatment Pumping StationPolluted Water Treatment Pumping Station
  • Polluted Water Treatment Pumping StationPolluted Water Treatment Pumping Station
  • Polluted Water Treatment Pumping StationPolluted Water Treatment Pumping Station
  • Polluted Water Treatment Pumping StationPolluted Water Treatment Pumping Station
  • Polluted Water Treatment Pumping StationPolluted Water Treatment Pumping Station
  • Polluted Water Treatment Pumping StationPolluted Water Treatment Pumping Station
  • Polluted Water Treatment Pumping StationPolluted Water Treatment Pumping Station
  • Polluted Water Treatment Pumping StationPolluted Water Treatment Pumping Station
  • Polluted Water Treatment Pumping StationPolluted Water Treatment Pumping Station
  • Polluted Water Treatment Pumping StationPolluted Water Treatment Pumping Station
  • Polluted Water Treatment Pumping StationPolluted Water Treatment Pumping Station

Polluted Water Treatment Pumping Station

The Polluted Water Treatment Pumping Station is a modular water pumping equipment developed by HAIDING SHIPYARD for industrial and mining environmental protection scenarios. It is specifically designed to handle water bodies with complex medium compositions and dynamic water levels, such as tailings ponds and industrial wastewater pools.

    When manufacturing this Polluted Water Treatment Pumping Station, the manufacturer of HAIDING SHIPYARD abandoned the traditional construction mode of fixed pump rooms. The entire machine was prefabricated in the factory and operated by floating on a floating platform. It can meet the needs of transporting and regulating sewage containing sand and trace corrosive media.

     

    In response to the strict compliance requirements of environmental protection projects, the material and configuration can be customized according to the water body medium composition. It can be put into production quickly without large-scale civil construction, solving the industry pain points of poor medium compatibility, long renovation cycle, and high difficulty in on-site maintenance of traditional sewage pumping equipment. It is suitable for long-term continuous operation and phased temporary sewage discharge projects.

     

    Why choose our factory?

    1. Cross-domain engineering transformation capability

    2. Pre-assessment service for medium conditions

    3. Full-process autonomous production control

    4. Project-level customization that can be implemented

    5. Practical accumulation of complex condition projects

    6. Complete delivery and engineering support

     

    Product features

    1. Medium-oriented material selection scheme

    The material of the flow channel is selected based on the corrosion of the wastewater and the solid content. It is wear-resistant and anti-corrosive, protecting the pump body and being suitable for complex wastewater.

    2. Adaptive water level floating platform structure

    The floating body automatically rises and falls with the rise and fall of the reservoir water level, and the suction port always maintains a reasonable immersion depth, so it will not have problems such as air suction or flow interruption due to changes in water level.

    3. Modular integrated assembly design

    The pump unit, filtration unit, and operation platform can be disassembled. They can be transported to the site separately by land and then assembled after arriving at the site. No cofferdam or pump room pouring is required, which shortens the project implementation cycle.

    4. Multiple on-site safety protection configurations

    The operation platform is paved with anti-slip surfaces and full perimeter guardrails. It is equipped with electrical overload and leakage protection modules to reduce the safety risks for personnel working in contaminated water areas.

    5. Pre-installed anti-blocking filtration components

    The inlet end is equipped with a detachable and washable filtration device to intercept large impurities, reduce impeller clogging faults, and reduce the frequency of frequent shutdowns for cleaning.

    6. Enhanced anti-corrosion treatment of the floating body

    The floating box is coated with multiple layers of anti-corrosion and wear-resistant coatings. When in long-term contact with wastewater and mineral slurry water, it can slow down rusting, pitting aging, and extend the service life of the entire machine.

    7. Modular layout friendly to operation and maintenance

    The core pump components and electrical units are arranged in the dry area above the floating platform. They do not need to be disassembled underwater. Maintenance and replacement can be completed on the shore or on the platform surface.

     

    Third-level acceptance standards

    The Polluted Water Treatment Pumping Station delivery is set up with three special acceptance nodes for cold conditions:

    1. Factory low-temperature trial operation

    2. On-site no-load debugging

    3. Winter low-temperature water pumping test

    Each acceptance indicator can be delivered for the client to verify


    Polluted Water Treatment Pumping StationPolluted Water Treatment Pumping StationPolluted Water Treatment Pumping Station


    Application scenario

    1. Mine Tailings Reservoir: Recovery of tailings clarified water, pumping out overflow water within the reservoir to achieve water resource recycling and reuse of tailings, suitable for the situation where the water level of the tailings reservoir is gradually rising.

     

    2. Chemical Industrial Park Sewage Ponds: Transfer and transportation of industrial production wastewater, emergency sewage pumping out in case of accidents, meeting the needs of environmental protection emergency response.

     

    3. Smelting and Mineral Processing Production Ponds: Transfer of wastewater containing mineral particles, treatment of process wastewater with solid particles.

     

    4. Solid Waste Disposal Leachate Ponds: Pumping and transporting leachate, responding to high-impurity water bodies with weak corrosivity.

     

    5. Environmental Protection Temporary Treatment Projects: Emergency water body treatment, phased sewage transfer, the project can be lifted off the ground and removed completely, without any ground-remaining structures.

     

    6. Industrial Facility Renovation and Upgrading Projects: Renovation of old sewage ponds, not damaging the original pond structure, as an upgraded solution to replace traditional fixed pumps.

     

    Special technical design

    1. Special design for protection against electrical condensation at low temperatures

    2. Special design for anchor system in icy environment

    3. Fluid optimization design for anti-icing and flow prevention of underwater suction ports

    4. Hydraulic performance verification of pump units under low-temperature conditions

     

    Winter Risk Warning Supplementary Plan

    The winter risk warning system for floating pumping stations in extremely cold regions is an added value supplementary plan specifically designed for water extraction operations in high-latitude ice-covered waters. It shifts from passive emergency repair to proactive prevention, reducing the risks of freezing blockages, equipment damage from freezing, and impacts from floating ice collisions.

    1. System Monitoring Contents

    Real-time monitoring of ambient air temperature to detect rapid cooling signals at night

    Monitoring of water body temperature at the water intake point to predict the trend of surface ice formation

    Collection of internal temperatures in the pump cabin and pipeline areas to warn of potential pipe freezing hazards

    Optional monitoring of ice displacement around the floating body to identify risks of ice compression

    2. Warning Grading Mechanism

    1. Low Temperature Alert (Yellow Warning): Temperature drops into the freezing alert range, sending out alerts for anti-freezing inspections and arranging staff to conduct equipment status checks.

    2. Freezing Risk Warning (Orange Warning): Water temperature is close to the freezing point, prompting the activation of insulation and heating devices and the early initiation of anti-freezing intervention operations.

    3. High-risk Ice Blockage Warning (Red Warning): Reaches extremely freezing conditions, triggering a high-risk alert, which can cooperation equipment to activate anti-freezing protection programs to avoid pipe expansion and pump body freezing blockage faults.

     

    3. Signal Push and Maintenance Response

    Monitoring data can be remotely transmitted to the monitoring terminal, with warning information directly reaching project managers. There is no need for personnel to remain on-site for long-term monitoring. After receiving the warning signal, our engineers can remotely assist customers in formulating anti-freezing handling plans and guide on-site completion of insulation checks, operation adjustments, etc., eliminating freezing hazards at the initial stage.

     

    FAQ

    Q1: Can this Polluted Water Treatment Pumping Station handle wastewater containing a large amount of sediment slurry?

    A1: Yes, it can be equipped with wear-resistant flow components and a pre-filtration structure, suitable for pumping out wastewater with high solid content such as mineral slurries.

     

    Q2: Is it necessary to pour concrete for the pump room foundation when deploying the equipment?

    A2: No, the equipment is modular and prefabricated, and can be lifted and lowered on site. Just ensure proper anchoring at the shore and it can be put into use.

     

    Q3: Will the floating body corrode and break down quickly when exposed to tailings wastewater for a long time?

    A3: The floating body adopts ship-level anti-corrosion technology. It has upgraded coatings for the wastewater medium, significantly delaying corrosion and aging.

     

    Q4: Can your factory provide project pre-condition assessment services?

    A4: Yes, we can provide the engineer with the medium, water level, and on-site conditions. The engineer can issue an assessment of compatibility and configuration suggestions.

     

    Q5: How long does it take to procure replacement parts when the pump components wear out later?

    A5: Core wear parts are supported by original factory supply. Regular spare parts can be quickly arranged for shipment to ensure the on-site operation progress.

     

    Q6: Does the equipment support explosion-proof electrical configuration for use in chemical high-risk factory areas?

    A6: Yes, it can be selected with the entire set of explosion-proof electrical control system according to the project's hazard area level.

     

    Q7: Can the factory cooperate in providing the factory delivery materials needed for project acceptance?

    A7: Yes, corresponding factory inspection reports, material certificates, etc. can be provided to assist with project acceptance.

    Send Inquiry
    Contact Info
    Looking to buy a dredger, tugboat or custom engineering vessel? Send your requirements to HAIDING SHIPYARD for product details, technical consultation and a competitive shipbuilding quotation.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept